Recommendations

Place the printer in an area where there is adequate space for ventilation, operation, and
servicing. The recommended minimal spacing is:

Overhead Clearance:

• 20 cm (7.9 in.) above the printer

Total Height Requirements:

• Printer: 58.9 cm (23.2 in.)

Other Clearances:

• 10 cm (3.9 in.) behind the printer
• 60 cm (23.6 in.) in front of the printer
• 10 cm (3.9 in.) on the left side of the printer
• 25 cm (9.8 in.) on the right side of the printer

Printing Safety Guidelines

• Wait 10-15 seconds between turning the printer off and on. Keep hands, hair, neckties, etc., away from the exit and feed rollers

When the printer is printing:

Do not remove the paper source tray that you selected in either the printer driver or control
panel.

• Do not open the doors.
• Do not move the printer.

Printer Supplies

• Use the supplies specifically designed for your printer. The use of unsuitable materials may cause poor performance and a possible safety hazard.
• Follow all warnings and instructions marked on, or supplied with, the printer, options, and supplies.